Click image to view full size image
Diaphragm Gasket for pump, valve and carburetor
Available material choice : PTFE foil, Teflon PFA foil, Polyimide(Upilex) film,Nickel foil,other rubber film
Thickness: 0.05-0.15mm
0.05 - 0.15mm Metering Diaphragm Sealing Gaskets For Carburetor
Description:
Metering diaphragm is the most crucial part in the diaphragm type carburetor. It determines the carburetor fuel stability, repeatability, endurability and difference on the various pose when engine is running.
It is the most common spare part for the diaphragm carburetor.
Our shaping mold was made in Japan,which extrude the diaphragm material as designed convolution at certain temperature, pressure and time.
Raw material: Made in USA; Thickness: 0.05-0.15mm
The punching die mold was made by WEDM-LS.
The part could be punched with the various outline.
The flexibility and recovery were checked by laser head at certain pressure adjusted.
The leakage performance is checked before shipping.
Pump Diaphragm description:
Pump diaphragm also is the key part in the diaphragm type carburetor. It supply the fuel with sufficient and stable pressure to carburetor by its material flexibility and structure.
Several raw material are optional (PET/NBR/Fiber glass), according to required temperature,pressure,two or four cycle engine, and resistance of oil,corrosion and wear.
The punching die mold was made by WEDM-LS.
The part could be punched with the various outline.
Valve Diaphragm description:
PFA diaphragm
Creep and pressure resistance,
Good thermal and mechnical properties
Excellent flexibility,
Long using life
PFA diaphragm for valve and pump
We are specialized in many different types of pfa,ptfe,rubber,fluoroplastic-rubber diaphragm used in valves and pumps to regulate dosing velocity and volume in wide variety of industries .
Type: Mechanical diaphragm series.
Hydraulic diaphragm series
